Fr4 PCB, Double-Sided Circuit Board, High Tg PCB with Green Ink Used in Electronics Industry

• Type: Rigid Circuit Board
• Dielectric: FR-4
• Material: Fiberglass Epoxy
• Flame Retardant Properties: V0
• Mechanical Rigid: Rigid
• Processing Technology: Electrolytic Foil
• Model NO.: PCB-A53
• Base Material: Copper
• Insulation Materials: Epoxy Resin
• Model: FR-4
• Brand: Abis
• Layer: 1-20 Layers
• Raw Material: Fr-4,Cu Base,High Tg Fr-4,PTFE,Rogers,Teflon etc.
• Board Thickness: 0.20mm-8.00mm
• Board Outline Tolerance: +0.10mm
• Surface Finish/Treatment: HASL,Enig,Chem,Tin,Flash Gold, OSP, Gold Finger
• Transport Package: Vacuum Packing
• Specification: 80*80 mm
• Trademark: Abis
• Origin: Shenzhen, China
• HS Code: 85340090
• Production Capacity: 720000m2/Year

Product Description

FR4 PCB, Double-Sided Circuit Board, High Tg PCB with Green Ink Used in Electronics Industry

Technical & Capability

Item	Speci.
Layers	1~20
Board Thickness	0.1mm-8.0mm
Material	FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, etc
Max Panel Size	600mm×1200mm
Min Hole Size	0.1mm
Min Line Width/Space	3mil(0.075mm)
Board Outline Tolerance	+/-0.10mm
Insulation Layer Thickness	0.075mm--5.00mm
Out Layer Copper Thickness	18um--350um
Drilling Hole (Mechanical)	17um--175um
Finish Hole (Mechanical)	0.10mm--6.30mm
Diameter Tolerance (Mechanical)	0.05mm
Registration (Mechanical)	0.075mm
Aspect Ratio	16:1
Solder Mask Type	LPI
SMT Mini. Solder Mask Width	0.075mm
Mini. Solder Mask Clearance	0.05mm
Plug Hole Diameter	0.25mm--0.60mm
Impedance Control Tolerance	+/-10%
Surface finish	ENIG, OSP, HASL, Chem. Tin/Sn, Flash Gold
Soldermask	Green/Yellow/Black/White/Red/Blue
Silkscreen	Red/Yellow/Black/White
Certificate	UL, ISO 9001, ISO14001, IATF16949
Special Request	Blind hole, Gold finger, BGA, Carbon ink, peekable mask, VIP process, Edge plating, Half holes
Material Suppliers	Shengyi, ITEQ, Taiyo, etc.
Common Package	Vacuum+Carton

 

Production capacity of hot-sale products
Double Side/Multilayer PCB Workshop	Aluminum PCB Workshop
Technical Capability	Technical Capability
Raw materials: CEM-1, CEM-3, FR-4(High TG), Rogers, TELFON	Raw materials: Aluminum base, Copper base
Layer: 1 layer to 20 Layers	Layer: 1 layer and 2 Layers
Min.line width/space: 3mil/3mil(0.075mm/0.075mm)	Min.line width/space: 4mil/4mil(0.1mm/0.1mm)
Min.Hole size: 0.1mm(dirilling hole)	Min.Hole Size: 12mil(0.3mm)
Max. Board size: 1200mm* 600mm	Max.Board size: 1200mm* 560mm(47in* 22in)
Finished board thickness: 0.2mm- 6.0mm	Finished board thickness: 0.3~ 5mm
Copper foil thickness: 18um~280um(0.5oz~8oz)	Copper foil thickness: 35um~210um(1oz~6oz)
NPTH Hole Tolerance: +/-0.075mm, PTH hole Tolerance: +/-0.05mm	Hole position tolerance: +/-0.05mm
Outline Tolerance: +/-0.13mm	Routing outline tolerance: +/ 0.15mm; punching outline tolerance:+/ 0.1mm
Surface finished: Lead-free HASL, immersion gold(ENIG), immersion silver, OSP, gold plating, gold finger, Carbon INK.	Surface finished: Lead-free HASL, immersion gold(ENIG), immersion silver, OSP, etc
Impedance control tolerance: +/-10%	Remain thickness tolerance: +/-0.1mm
Production capability: 50,000 s.q.m/month	MC PCB Production capability: 10,000 s.q.m/month

Q/T Lead Time

Category	Quickest Lead Time	Normal Lead Time
Double-sided	24hrs	120hrs
4 Layers	48hrs	172hrs
6 Layers	72hrs	192hrs
8 Layers	96hrs	212hrs
10 Layers	120hrs	268hrs
12 Layers	120hrs	280hrs
14 Layers	144hrs	292hrs
16-20 Layers	Depends on the specific requirements
Above 20 Layers	Depends on the specific requirements

Quality Control

How ABIS Working Out the Manufacturing Issues in FR4 PCB?

-Hole Preparation

Removing debris carefully & adjusting drill machine parameters: before plating through with copper, Abis pays high attention to all holes on an fr4 PCB treated to remove debris, surface irregularities, and epoxy smear, the clean holes ensure the plating successfully adheres to the hole walls. also, early in the process, drill machine parameters are adjusted accurately.

 

- Surface Preparation

Deburring carefully: our experienced tech workers will be aware ahead of time that the only way to avoid a bad outcome is to anticipate the need for special handling and to take the appropriate steps to be sure that the process is done carefully and correctly.

 

-Thermal Expansion Rates

Accustomed to dealing with the various materials, Abis will be able to analyze the combination to be sure that it is appropriate. then keeping the long-term reliability of the CTE (coefficient of thermal expansion), with the lower case, the less likely the plated through holes are to fail from repeated flexing of the copper which forms the internal layer interconnections.

 

-Scaling

Abis control the circuitry is scaled up by known percentages in anticipation of this loss so that the layers will return to their as-designed dimensions after the lamination cycle is complete. also, using the laminate manufacturer's baseline scaling recommendations in combination with in-house statistical process control data, to dial-in scale factors that will be consistent over time within that particular manufacturing environment.

 

-Machining

When the time comes to build your PCB, Abis be sure that you choose to have the right equipment and experience to produce it correctly on the first try.

Pre-Sale and After-Sale Service
1 Hour quotation
2 hours of complaint feedback
7*24 hour technical support
7*24 order service
7*24 hour delivery
7*24 production run

Company Profile

Abis Circuits Co., Ltd, is a professional PCB manufacturer which was established in Oct 2006. Focus on double side, Multilayer, and HDI PCB mass production.
We have two factories together. The factory in Shenzhen is specialized in small and middle volume orders. Another in Jiangxi province is for big volume and HDI.

 

Factory:
 

Operation plant space: (I) 10000 Square meters

(II) 60000 Square meters
 

Employees: (I) 300 Man Powers

(II) 900 Man Powers
 

Eng. Technical: (I) 20 QA QC Engineers

(II) 60 QA, QC Engineers

Certification Standards

Company Show

FAQ
Q₁:When can I get the quotation?
A: We usually quote 1 hour after we get your inquiry. If you are very urgent, please call us or tell us in your email.

Q₂:Can you provide free samples for me?
A: Free samples depend on your order quantity.

Q₃:I am a small wholesaler, do you accept small orders?
A: It's no problem. If you're a small wholesaler, we would like to grow up with you together.

Q₄:How many days will the sample be finished? And how about the mass production?
A: Generally 2-3 days for sample making. The lead time of mass production will depend on the order quantity and the season you place the order.

Q₅:If I order a big quantity, what's the good price?
A: Please send the details inquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place, etc. We will make an accurate quotation for you as soon as possible.

Q₆: How can we know the processing of the PCB order?
A: Each Customer will have a sale to contact with you. Our working hours: AM 9:00-PM 19:00(Beijing Time) from Monday to Friday. We will reply to your email as soon as quickly during our working time. And you also could contact our sales by cellphone if urgent.

Q₇:Can I have samples to test?
A: Yes, we are pleased to supply module samples to test and check the quality, mixed sample order is available. Please note buyer should pay for the shipping cost.

Q₈:Can you design PCB and make files for us?
A: Yes, We have a professional drawing engineers' team that you can trust.

Q₉:If all PCB, PCBAs will be tested before delivery if we provide the function testing method?
A: Yes, we ensure that each piece of PCB, and PCBA will be tested before shipment, we ensure the goods we sent with good quality

Q₁₀:What is the shipping method?
A: We suggest you use DHL, UPS, FedEx, and TNT forwarder.

Q₁₁:How about the payment terms?
A: By T/T, Paypal, Western Union, etc.

Why choose us?

·With ABIS, customers significantly and effectively reduce their global procurement costs. Behind each service provided by ABIS, is hidden a cost-saving for customers.

. We have two shops together, one is for prototype, quick turn, small volume making. The other is for mass production also for HDI board, with highly skilled professional employees, for high-quality products with competitive price and on-time delivery.

. We provide very professional sales, technical and logistic support, on a worldwide basis hours of complaint feedback.
 

Please keep us informed of any interest!
ABIS cares about every your order even 1 piece!