Professional for Consumer Electronics Fr4 PCB Supplier in Shenzhen

• Type: Rigid Circuit Board
• Dielectric: FR-4
• Material: Fiberglass Epoxy
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: pcb
• Application: Consumer Electronics
• Flame Retardant Properties: V0
• Mechanical Rigid: Rigid
• Processing Technology: Electrolytic Foil
• Base Material: Copper
• Insulation Materials: Epoxy Resin
• Transport Package: Vacuum Packing
• Specification: 290*230 mm
• Trademark: Abis
• Origin: China
• HS Code: 85340010
• Production Capacity: 500000m2/Year

Product Description

FR4 PCB Introduction

 

--Definition

FR means "flame-retardant," FR-4 (or FR4) is a NEMA grade designation for glass-reinforced epoxy laminate material, a composite material composed of woven fiberglass cloth with an epoxy resin binder that makes it an ideal substrate for electronic components on a printed circuit board.

 

-Pros and Cons of FR4 PCB

 

• FR-4 material is so popular because of its many wondrous qualities that can benefit printed circuit boards. In addition to being affordable and easy to work with, it is an electrical insulator with very high dielectric strength. Plus, it's durable, moisture-resistant, temperature-resistant and lightweight.

• FR-4 is a widely relevant material, popular mostly for its low cost and relative mechanical and electrical stability. While this material features extensive benefits and is available in a variety of thicknesses and sizes, it isn't the best choice for every application, especially high-frequency applications like RF and microwave designs. 

 

Rigid PCB Manufacturing Capacity

 

ABIS experienced in making special materials for rigid PCB, such as: CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, etc. Below is a brief overview FYI.

 

 

 

 

Rigid PCB Manufacturing Capacity

 

ABIS experienced in making special materials for rigid PCB, such as: CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, etc. Below is a brief overview FYI.

 

 

Item	Speci.
Layers	1~20
Board Thickness	0.1mm-8.0mm
Material	FR-4, CEM-1/CEM-3, PI, High Tg, Rogers, PTEF, Alu/Cu Base, etc
Max Panel Size	600mm×1200mm
Min Hole Size	0.1mm
Min Line Width/Space	3mil(0.075mm)
Board Outline Tolerance	+_0.10mm
Insulation Layer Thickness	0.075mm--5.00mm
Out Layer Copper Thickness	18um--350um
Drilling Hole (Mechanical)	17um--175um
Finish Hole (Mechanical)	0.10mm--6.30mm
Diameter Tolerance (Mechanical)	0.05mm
Registration (Mechanical)	0.075mm
Aspect Ratio	16:1
Solder Mask Type	LPI
SMT Mini. Solder Mask Width	0.075mm
Mini. Solder Mask Clearance	0.05mm
Plug Hole Diameter	0.25mm--0.60mm
Impedance Control Tolerance	+_10%
Surface finish	ENIG, OSP, HASL, Chem. Tin/Sn, Flash Gold
Soldermask	Green/Yellow/Black/White/Red/Blue
Silkscreen	Red/Yellow/Black/White
Certificate	UL, ISO 9001, ISO14001, IATF16949
Special Request	Blind hole, Gold finger, BGA, Carbon ink, peekable mask, VIP process, Edge plating, Half holes
Material Suppilers	Shengyi, ITEQ, Taiyo, etc.
Common Package	Vacuum+Carton

 

Lead Time

PCB Lead Time

 

Category		Q/T Lead time		Standard Lead Time	Mass Production
Double Sided		24hrs		3-4 working days	8-15 working days
4 Layers		48hrs		3-5 working days	10-15 working days
6 Layers		72hrs		3-6 working days	10-15 working days
8 Layers		96hrs		3-7 working days	14-18 working days
10 Layers		120hrs		3-8 working days	14-18 working days
12 Layers		120hrs		3-9 working days	20-26 working days
14 Layers		144hrs		3-10 working days	20-26 working days
16-20 Layers		Depends on the specific requirements
20+ Layers		Depends on the specific requirements

Our Advantages

• High-end euipment-high speed Pick and Place Machines that can process about 25,000 SMD components per hour
• High efficient supply ability 60K Sqm monthly-Offers low volume and on-demand PCB production, also large-scale production
• Professional engineering team-40 engineers and their own tooling house, strong at OEM. Offers two easy options: Custom and Standard-In-depth knowledge of IPC Class II and III Standards

We provide a comprehensive turn-key EMS service to customers who want us to assemble the PCB into PCBA, including prototypes, NPI project, small and medium volume. We are also able to source all components for your PCB assembly project. Our engineers and sourcing team have rich experience in supply chain and EMS industry, with deep knowledges in SMT assembly allowing to resolve all the production issues. Our service is cost-effective, flexible, and reliable. We have satisfied customers across many industries including medical, industrial, automotive and consumer electronics.

 

 

 

Quality Control

Quality Control

-Advanced equipment list

AOI Testing	Checks for solder paste Checks for components down to 0201 Checks for missing components, offset, incorrect parts, polarity
X-Ray Inspection	X-Ray provides high-resolution inspection of: BGAs/Micro BGAs/Chip scale packages /Bare boards
In-Circuit Testing	In-Circuit Testing is commonly used in conjunction with AOI minimizing functional defects caused by component problems.
Power-up Test	Advanced Function Test Flash Device Programming Functional testing

 

• IOC incoming inspection
• SPI solder paste inspection
• Online AOI inspection
• SMT first article inspection
• External assessment
• X-RAY-welding inspection
• BGA device rework
• QA inspection
• Anti-static warehousing and shipment

-Persue 0% complaint on quality

All department implements according to ISO and the related dept has to provide 8D report if any board scrapped to defective.

• All the outgoing boards have to be 100% electronic tested, impedance tested and soldering.
• Visual inspected, we make the inspect microsection before shipment.
• Train the mindset of employees and our enterprise culture, make they happy with their work and our company, it's helpful for them to produce good quality products.
• High quality raw material (Shengyi FR4, ITEQ, Taiyo Solder Mask Ink etc.)
• The AOI could inspect the whole set, boards are inspected after each process

Pre-Sale and After-Sale Service
1 Hour quotation
2 hours complaint feedback
7*24 hour technical support
7*24 order service
7*24 hour delivery
7*24 production run

Company Profile

WELCOME TO ABIS CIRCUITS CO., LTD

Production line

ABIS GROUP is a professional PCB manufacturing which is focused on double side, Multilayer and HDI PCB mass production. The company was established in 2006, We have two factories together, The factory in Shenzhen is specialized in small and middle volume orders and the factory in Huizhou is for big volume and HDI.
 

	Shenzhen	jiangxi
Area	10,000 Square meters	60000 Square meters
Employees	300	900
Quality	20	60
Administration	5	10
Engnieering	20	90
Over Sales	10	20

. Shenzhen PCB Factory I (Focus on Prototyping, Quick turn, Medium volume)

Item	Capacity
Raw material	Aluminum base, Cooper base
Layer	1-8 Layer
Min.Line width/space	4mil/4mil(0.1mm/0.1mm)
Min.hole size	12mil(0.3mm)
Max. Board size	1200mm*560mm(47in*22in)
Finished board thickness	0.3-5mm
Cooper foil thickness	35um-210um(1OZ-6OZ)
Remain thickness tolerance	+/-0.1mm
Hole position tolerance	+/-0.05mm
Routing outline tolerance	+/-0.15mm
Punching outline tolerance	+/-0.1mm
Surface finished	Lead-free HASL, Immersion gold, immersion silver, OSP, etc
MC PCB Production capability	10,000 a.q.m/month

.jiangxi PCB Factory II (Mass production& HDI)

Item	Capacity
Raw material	CEM1, CEM3, FR1 FR4, Rogers, Teflon, etc.
Layer	1 Layer-20 Layer
Min.Line width/space	3mil/ 3mil (0.075mm/0.075mm)
Min.hole size	0.1mm(drilling hole)
Max. Board size	1200mm* 600mm
Finished board thickness	0.2mm-6.0mm
Cooper foil thickness	18um- 280um (0.5oz-8oz)
NPTH Hole Tolerance	+/- 0.075mm
PTH hole Tolerance	+/-0.05mm
Outline tolerance	+/-0.13mm
Surface finished	Lead-Free HASL, immersion gold(ENIG), Immersion silver, OSP, gold plating, gold finger, Carbon INK
Impedance Control Tolerance	+/-10%
Production capability	50,000 s.q.m/ month

ABIS with Customer

 

 

Certifications

 

Packaging & Shipping

 

ABIS CIRCUITS Company is not only trying to give customers a good product, but also pay attention to offering a complete and safe package. Also, we prepare some personalized services for all the orders.

 

-Common packaging:

• PCB: Sealed bag, Anti-static bags, Suitable carton.
• PCBA: Antistatic foam bags, Anti-static bags, Suitable carton.
• Customized Packaging: The carton outside will be printed the name of the customer address, mark, the customer needs to specify the destination and other information.

-Delivery Tips:

• For small package, we advise to choose byExpress or DDU service is the quickest way.
• For heavy package, the best solution is by sea transportation.

 

Business Terms
-Accepted Delivery Terms
FOB, CIF, EXW, FCA, CPT, DDP, DDU, Express Delivery, DAF

 

--Accepted Payment Currency
USD, EUR, CNY.

-Accepted Payment Type
T/T, PayPal, Western Union.

 

Quotation from ABIS

To ensure an accurate quote, be sure to include the following information for your project:

• Complete GERBER files including the BOM list
• Quantities
• Turn time
• Panelization Requirements
• Materials Requirements
• Finish requirements

Your custom quote will be delivered in just 2-24 hours, depending on the design complexity.

 

FAQ

 

FAQ
Q₁:When can I get the quotation?
A:We usually quote with 1 hour after we get your inquiry. If you are very urgent, please call us or tell us in your email.

Q₂:Can you provide free samples for me?
A:Free samples depend on your order quantity.

Q₃:I am a small wholesaler, do you accept small order?
A:It's no problem. If you're small wholesaler, we would like to grow up with you together.

Q₄:How many days will samples be finished? And how about the mass production?
A:Generally 2-3 days for samples making. The lead time of mass production will depend on the order quantity and the season you place the order.

Q₅:If I order big quantity, what's the good price?
A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.

Q₆: How can we know the processing about PCB order?
A: Each Customer will have a sale to contact with you. Our working hours: AM 9:00-PM 19:00(Beijing Time) from Monday to Friday. We will reply your email as soon as quickly during our working time. And you also could contact with our sales by cellphone if urgent.

Q₇:Can I have samples to test?
A: Yes, we are pleased to supply module samples to test and check quality, mixed sample order is available. Please note buyer should pay for shipping cost.

Q₈:Can you design pcb and make files for us?
A:yes,We have a professional drawing engineers' team that you can trust.

Q₉:If all pcb , PCBAs will be tested before delivery if we provide the function testing method?
A:Yes, we ensure that each piece of pcb, PCBA will be tested before shipment, we ensure the goods we sent with good quality

Q₁₀:What is the shipping method?
A:We suggest you using DHL, UPS, FedEX, TNT forwarder.

Q₁₁:How about the payment terms?
A:By T/T, Paypal, Western Union, etc.
 

Please keep us informed for any interest!
ABIS cares every your order even 1 piece!